Free Shipping on ALL orders!

Bezzera Mitica Commercial Espresso Machine – switchable tank / direct connect – V2

Bezzera Mitica Commercial Espresso Machine – switchable tank / direct connect – V2


Features:         

  • Heat exchanger with a large 2.0 liter boiler allows you to brew coffee, steam milk, and pour hot piping water all at the same time.
  • Stainless steel body polished to a mirror finish.
  • E61 grouphead - hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead and your portafilter nice and hot.
  • Boiler pressure gauge (measures 0-3) to indicate steam boiler pressure.
  • Pump pressure gauge (measures 0-16) to indicate brew pressure during espresso extraction. Please note that the only time this gauge should be looked at is when extracting espresso. At all other times, the reading is irrelevant.
  • Lever next to the grouphead activates a microswitch which turns on the pump to pump water through the coffee grinds.
  • Multi-directional steam wand and hot water wand allow for more flexibility. The wands are not insulated and thus provided faster steaming/frothing of milk over 'no-burn' steam wands.
  • Joystick controls for steam and hot water wands give instant on/off operation as opposed to knobs that you must turn clockwise/counter clockwise.
  • Rotary vane pump and motor situated underneath reservoir and adjustment can be made from underneath the espresso machine.
  • Switchable from reservoir mode to direct plumb mode: In order to make the switch, there is a loose wire found in reservoir area inside. This wire needs to be connected. The included plug needs to be inserted into the reservoir connection underneath the reservoir. The plug needs to be removed from the water line connection under the machine, and the included stainless steel braided hose needs to be attached. We suggest purchasing the fitting we receommend to attach on the other end of the hose for the water line.
  • Three way manual solenoid valve allows quick removal of portafilter after espresso extraction.
  • Very large water tank (4 liters) - less refills for higher volume use. Refilling occurs from top of machine by lifting up lid on hinges.
  • Passive cup warmer is heated faster with the non-insulated boiler
  • Full size pressurestat regulated boiler pressure
  • Full size vacuum breaker valve which removed vacuum from boiler after powering to the off position
  • Rocker on/off power switch
  • Auto-fill relay (brain unit), made by Gicar, is placed on bottom base of unit away from the heat near the top of the machine. There is a cover placed over the relay to deflect possible water leakage.
  • Accessories - single spout portafilter, double spout portafilter, 1-cup filter basket, 2-cup filter basket, blind filter basket, plastic tamper, plastic scoop, grouphead cleaning brush, reservoir plug, 1.5 meter stainless steel braided hose, and instruction manual.

Specifications:         

  • Measurements: 15.75" H x 12.75" W x 18" D. Cup warmer section has a 1" lip.
  • Weight: pounds TBD pounds (TBD kilograms).
  • Power: 1450 watts, 110 volts only, 50/60 hertz.
  • Boiler capacity: 0.53 gallons (2 liters).
  • Water tank capacity: 1.06 gallons (4 liters).
  • Approval(s): CE

Notes:          

  1. The instructions say there is a nipple but its not included.
  2. Please note that the portafilter handles may come with standard handle and not with the serpent logo as shown in the photograph.
News & Updates

Sign up to get the latest on sales, new releases and more …