Free Shipping on ALL orders!

Bezzera Magica V2 Commercial Espresso Machine – tank, HX

Bezzera Magica V2 Commercial Espresso Machine – tank, HX


Features:                

  • Heat exchanger allows you to brew coffee, steam milk, and pour hot piping water all at the same time.
  • Stainless steel body polished to a mirror finish.
  • E61 grouphead - hot water circulates from the heat exchanger through the grouphead and back to keep the grouphead and your portafilter nice and hot.
  • Boiler pressure gauge (measures 0-3) to indicate steam boiler pressure.
  • Pump pressure gauge (measures 0-16) to indicate brew pressure during espresso extraction.Please note that the only time this gauge should be looked at is when extracting espresso. At all other times, the reading is irrelevant.
  • Lever next to the grouphead activates a microswitch which turns on the pump to pump water through the coffee grinds.
  • Multi-directional steam wand and hot water wand allow for more flexibility.
  • Joystick controls for steam and hot water wands give instant on/off operation as opposed to knobs that you must turn clockwise/counter clockwise.
  • Powerful vibratory pump rated at 15 bar please note that only 9 bar is needed for espresso.
  • Three way solenoid valve allows quick removal of portafilter after espresso extraction.
  • Very large water tank (4 liters) - less refills for higher volume use.
  • Passive cup warmer on the top with guard rails.
  • Accessories - single spout portafilter, double spout portafilter, 1-cup filter basket, 2-cup filter basket, blind filter basket, plastic tamper, plastic scoop, grouphead cleaning brush, and instruction manual.

Specifications:              

  • Measurements: 16.34" H x 11.81" W x 16.73" D (41.5 cm H x 30 cm W x 42.5 cm D).
  • Weight: pounds 50.04 pounds (22.7 kilograms).
  • Power: 1450 watts, 110 volts only, 50/60 hertz.
  • Boiler capacity: 0.53 gallons (2 liters).
  • Water tank capacity: 1.06 gallons (4 liters).
  • Approval(s): CE

Notes:

      1.  The rails on the top cover can be removed to lower the height of the machine to ~14.75" (37.47 cm). Underneath the top cover there are 6 nuts (2 per rail) that you must unscrew. A 7mm socket wrench should work.

News & Updates

Sign up to get the latest on sales, new releases and more …